Accessories

Aluminium F Profile
Colour: Brown
Length: 25mm x 4.0mtr

The Aluminium F profile is used at the edge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.

Gable End Finishing Profile - Cap 40
Available in 3000mm or 6000mm Lengths
Available in Brown or White

Capping 40 gable end finishing profile is suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Gable End Finishing Profile - Cap 60
Available in 3000mm or 6000mm Lengths
Available in Brown or White

Cap 60 gable end finishing profile is suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Cap 40 Wall Flashing Profile
Available in 3000mm or 6000mm Lengths
Available in Brown or White

Suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Cap 60 Wall Flashing Profile
Available in 3000mm or 6000mm Lengths
Available in Brown or White

Suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Glazing Bar

40/60 glazing bars for roof pitches of 5deg+. The capping bar is used where multi-wall polycarbonate roofing sheets, or solid flat sheets meet on the roof rafter. Please select colour and size required below.

A robust aluminium section suitable as standard for the ridge with a roof pitch angle of 15-35 degrees. Available Sizes 3000mm & 6000mm & in White or Brown.

Aluminium radius end caps providing a radiused end finish for cresfinex M2 Ridge bar.

Material: Aluminium
Size: 100mm
Colours Available: Brown or White

Aluminium radius end caps providing a radiused end finish for cresfinex M2 Ridge bar.

Material: Aluminium
Size: 100mm
Available in Brown or White

A sticky butyl strip suitable for flashing up against many types of surface, providing a watertight seal without the need to dress into the wall.

Available in Lead Or White Finish

Sold By The Linear Metre - £10 excl. VAT Per Linear Metre

Polycarbonate Fixing Buttons can be used to give additional fixing strength to multiwall polycarbonate roofs, particularly where wind and/or snow loading is a concern.

Multiwall Roof Fixing Buttons. Pre-Packed Nylon fixing buttons complete with screws. Supplied in a pack of 10 with foam washers and suitable length No.12 Pan Headed Slotted Screws

Available Colours:

• White : 6mm 
• White & Brown : 10mm 16mm 25mm 

Silicone 310ml (794)n

A non acid low modulus silicone for use with polycarbonate roof sheet.

As some silicones can attack polycarbonate, a neutral silicone needs to be used with polycarbonate roof sheet.

• Resistant to ageing, weathering and UV
• Paint-compatible

Aluminium F Profile
Colour: Silver Mill
Length: 16mm x 3.0mtr

The Aluminium F profile is used at the side edge of Multiwall roofing sheet. Available to suit 16mm multiwall polycarbonate roofing panels, this accessory is easy to install and provides an aesthetically pleasing finish to the roof edges.

Aluminium U Profile
Colour: Silver Mill
Length: 16mm x 3.0mtr

The Aluminium U profile is used at the outside end edge of Multiwall roofing sheet. Available to suit 16mm multiwall polycarbonate roofing panels, this accessory is easy to install and provides extra strength and a [professional look.

Ventilation or breather tape to be used with Multiwall Polycarbonate sheets. Anti dust breather tape is used to seal the bottom edge of Multiwall polycarbonate sheet.  It prevents ingress of dust and insects and minises condensation, while allowing free movement of air inside the sheet structure.

• Sold by the linear metre
• 25mm tape width for use with 6mm & 10mm Multiwall sheet
• 38mm tape width for use with 16mm & 25mm Multiwall sheet

*** Select which tape width you require and enter in how many metres you would like to order. The price is per linear metre. ***

Strong Aluminium tape to seal the top edge of Multiwall polycarbonate sheet, preventing the ingress of dirt, insects and algae. 

• Sold by the linear metre
• 25mm tape width for use with 6mm & 10mm Multiwall sheet
• 38mm tape width for use with 16mm & 25mm Multiwall sheet

*** Select which tape width you require and enter in how many metres you would like to order. The price is per linear metre. ***

Stainless steel channel washer for use in fixing Marlon Clickloc easy fit polycarbonate roofing panels. East to install, low maintenance. Sold in packs of 50.

TEST PRODUCT- DO NOT ORDER- DO NOT SHIP

PVC Eaves Fillers are used in the installation of Corrugated PVC sheet to prevent roof clatter and to support the sheets when fixed.

Corrugated sheet fixings are specially designed for use when installing PVC roofing sheets on timber structures to help prevent over-tightening of the fixings.

A pre-formed PVC flashing which fits perfectly over the PVC corrugated sheet and is easily flashed over to create a waterproof seal. 

A white self-adhesive strip developed for use when installing Corrugated PVC Roofing Sheet. Use along sheet joins to create a watertight seal between sheets to prevent the ingress of water and dirt.

Secures and seals acrylic and polycarbonate sheets along the timber rafters of wooden conservatory, lean-to roofs, carports and shelters. Suitable for glazing of 10mm, 16mm, 20mm and 25mm thickness.

The Exitex Capex Snap Down Glazing Bar, designed to provide unmatched durability, functionality, and ease of installation for your roofing and glazing projects. This innovative glazing bar is engineered with precision to accommodate acrylic/perspex or polycarbonate panels effortlessly, offering a secure and weatherproof solution.